Hi i am a time served springmaker with over 25yrs experience . I can make clips , brackets , small and large springs to samples or spec drawings . Should anyone require a quote or spring making please contact me via the website . Thanks Chris
Post added: 15/07/2012 22:15:39
Reply Posted by Keith Farmer On 17/07/2012 06:23:06
I have a pair of small percussion pistols.
The mainspring of one is OK, but the other is very weak because the spring is cracked at the `apex`.
Please advise a rough idea of the price for a replacement spring.
Thankyou.
Keith Farmer
Reply Posted by Mark.45 On 17/07/2012 19:45:47
Hi, I have a webley mark 3 and need a new main spring for this revolver. Can you make this? If so what is the cost? Many thanks.
Reply Posted by A.R.Buckland Gunsmiths On 25/10/2012 09:30:19
Good morning Chris, could you please let me know if you can make a specific small flat spring and two tight coil springs for an English shotgun? Best regards, Anthony R. Buckland. A.R. Buckland Gunsmiths. Tel 01508493177
Reply Posted by Ludwig On 12/03/2013 13:44:41
Hello Chris,
I have a collection of pinfire pistols and some are missing springs. Some are tiny,some are just 1cm lever spring and another is mainspring - can you help? - you may have spares? - can possibly take good springs from working pistol and post to you to copy?
Many thanks
peter.owen@virgin.net
Reply Posted by Simon B On 12/05/2013 18:06:45
Hello Chris, I have a volunteer pattern flintlock Dragoon pistol that needs a new swivel mainspring and roller frizzen spring. Would you be able to give me a quote for these parts and a rough idea of
turn around time.
Reply Posted by M wilson On 12/05/2013 23:43:44
Hello all good to see someone offering this service I used a company j blackley & sons they produce springs by direct copy in lost wax casting or from stock spring steel,springs can be purchased in the rough or finished.
