These stocks are made for long range prone shooting. They are all made in hard anodised T6 6082 aluminium with composite grips and side panels. The balance of this stock is superb. This is proven by being able to balance a fully equipped rifle on its muzzle. This can be seen on the picture below. The stock is designed so the line of the recoil is as close to the core line of the barrel as possible. this means excellent recoil absorption and greater accuracy. The stocks comes fully equipped from GRS with all rails, sling mounts, either a 5 or 10 round magazine (AICS compatible magazine well) and of course or famous adjustability on length of pull, cheek piece and height of the recoil pad, all done with a touch of a button. The grip is fixed on a rail, so you can adjust the distance from the grip to the trigger, giving perfect finger placement. In most cases it is a matter of dropping the action into the stock and torque up the action screws, then off to the range. (Howa needs a light change on the action to fit the AI magazines) The planned inlets is as follows: , SSG 3000/ Sauer 200 STR – Ready to order, Tikka T3 SA – Ready to order, Tikka T3 LA – Ready for delivery in February, Howa/ Weatherby vanguard SA – Ready for delivery in March, Howa/ Weatherby vanguard LA – Ready for delivery in April, Remington 700 SA – Ready for delivery in May, Remington 700 LA – Ready for delivery in May, Body made in hard anodised 6082 T6 aluminium. , Hinge is made in 304 stainless steel (extra option) , Composite grip and side panels. , 0.5″ limbsaver/GRS recoil pad. , SpeedLock adjustment system. , LOP 35.5-38.5 cm. , 30mm adjustment LOP and cheekpiece. , Height adjustable recoil pad included. , Flush cup sling mounts on all 4 piccatinny rails in front and both sides of the rear stock. , Piccatinny rail on rear stock. , Flush cup sling mounts included. , Total length 79cm, Weighs 1850-2000grams depending on model, SSG 3000 model is made to fit original magazines, The T3 SA stock comes with one 10 round Polymer magazine in 308 (also fits 243, 260 and 22-250) or 223 (also fits 222). The magazine well also fits for the standard 3.050″ (78mm) 5 and 10 shot AI magazines, The T3 LA comes with one 5 round single stack metal magazine in either 300Winchester magnum (also fits 7mm rem mag) and 30.06 Springfield (also fits 6.5×55 Swedish Mauser) Torque recommendations for Tikka T3 Rear screw 5nm Front screw 5nm.