Browse the largest selection of guns on Gunstar. Whether you are looking for competition Shotguns, hunting Rifles, or garden-friendly Air Rifles, our marketplace connects you with registered dealers and private sellers active in your area.
This is an extremely rare a. 670” bore officers antique flintlock fusil with a 38 inch barrel with an overall length of 53 inches by Hirst and is numbered 7 on the barrel tang. Mr Jim Kochan, an Am...
SubcategoryMuzzleloader
Sale typeTrade
RangeAmerican War of Independence Era**Extremely Rare .67 Pistol Bore Officers Fusil
ModelAmerican War of Independence Era**Extremely Rare .67 Pistol Bore Officers Fusil Brown Bess, Number 7 by Hirst. Sn - 23230:2
Beretta 92FS
Ref 22008
. 177 Cal
CO2 2 mags and original case
Condition 7. 5/10
This gun can be collected in person from our Scunthorpe shop or can be sent to your local gunshop
WW2 Era To Pre 1952 Christys London Lancashire Constabulary Police Male Constable's/ Sergeant's 6 Panel Ball Top Helmet With Blackened King's Crown Helmet Night Patrol Plate. POL 601 - POL 601
The ...
HW 100-S full length sporter beautiful walnut stock in excellent all round unmarked condition very lightly used and well looked after comes with a Hawk IR 4-16-50 scope hard protective carry case and ...
Beautiful and Unique Holland & Holland 8 bore.
Rotary underlever hammer gun.
Year 1874
Engraved Holland & Holland on the sideplate and 98 New Bond Street London on top of the barrel/chamber. ...
Better in every way than the new Lightning CLX, and effectively a new gun!
This one has testing shots only fired through it and is virtually unmarked and performing perfectly. Consistent accurate ...
. 270Win BRNO ZKK600 Bolt Action Rifle.
Blued Steel Action & Barrel with Intergrated Sights. 5+1 Round Floor Plate Magazine.
Fitted in a Walnut Sporter Stock.
Complete with a Carl Zeiss Jena ...
EK Achery Vlad Pistol Crossbow
Comes with a pack of new bolts, both a 60lb limb and 90lb limb (60lbs limb is a little worn out - see in photos), a red dot sight, and a 8 round magazine. ...
Air arms shamal. 177
Excellent condition for age
This is a very rare Air rifle to come across and is number 0005 off the production line
Very much a collectors piece but can also be used
Has ...
H&K MP5 submachine gun. Original German H&K not a Turkish clone. Has moving cocking handle and bolt under spring pressure. EU/UK deactivation with certificate. £1250 posted.
Airsoft MK23 gas non-blowback pistol kit, 3D printed plastic, black.
Allows the original silencer/extension to be used.
Top, bottom and side picatinny rails.
With optional stock. ...
Custom made slip on threaded adapter with a front sight and glow in the dark dot allowing to attach a sound moderator to your Crosman pump airgun.
The body is plastic, but it has a metal thread, ...
This is a 60mm (2. 5") long adapter (not a silencer) allowing to attach a moderator to your air rifle.
The adapter is a direct replacement of the original plastic front sight and will fit over a ...
The LOBO Mustang PCP air rifle is a great fun, but is very noisy. So, this is a solution, which will not make your air gun looking awkward and will reduce the noise by about 50%. It slips on to both ...
This is a replacement grip (£20) and optional stock (£25) with adjustable butt pad and cheek rest for the Reximex Mito PCP airgun.
The match grip has about 20mm vertical adjustment of the shelf fo...
For sale is a front sight with fibre optic or glow in the dark dot and a standard 1/2" UNF thread allowing to attach a silencer to your Rohm Twinmaster airgun.
The body of the adapter is made of 3D ...
This single shot loader is ideal for target competitions with a Weihrauch HW100. It automatically pops out at the last stage of cocking the air rifle after each shot. The swinging part securely ...
An ambidextrous grip (£19), made of strong 3d printed plastic, black for you CP1. Textured handle.
The skeleton stock is optional (£30 for both grip and stock).
Fixing bolts (M5x20 and M4x10) ar...
A selection of superlight noise reducers for airguns, 3D printed with baffles.
Material is plastic reinforced with carbon fibre.
All have internal 1/2" UNF thread to attach to the gun.
Pic 1: ...