WW2, Luftwaffe Pilots Leg Strap, Flare Cartridge Holder for 6 Flares Including 3 fired Alloy Flare Cartridges.
This is an original WW2, pilots leg strap for holding flare cartridges which were used ...
ORIGINAL & RARE**EARLY**Nazi German 1934 Dated RZM Labelled Hitler Jugend Hitler Youth (HJ) Double Sided Multi Panel Construction Podium Flag / Banner With HJ Swastika Diamond & Nazi HJ Swastika. N ...
This is a black leather holster for the Czech CZ-27 semi automatic pistol. The pistol was adopted by the Czechs in 1927 and was manufactured at the Česká Zbrojovka (CZ) in Czechoslovakia. Captured we...
CategoryAccessories
SubcategoryCare & Storage
ConditionUsed
MakeHolster for the Czech CZ-27 Pistol. MISC 2017
ModelHolster for the Czech CZ-27 Pistol. MISC 2017
American WW2, 1943 Dated, M1 Carbine Carry Case by Coss Canvas Products. MISC 2007 - MISC 2007
This is an original American WW2, 1943 dated green canvas carrying case with shoulder strap for the M1 ...
ORIGINAL**AS FOUND**WW2 Nazi German Heer / Army Single Decal M42 Combat Helmet With Original Liner & 1943-1945 Reichsbetriebsnummer (Reich Business Number) Marked Leather Chin Strap. Sn 23428 - ...
Hawke Airmax 30 SF Compact scope
3-12 x 40
Purchased new in March 2026
Great scope, ideal for HFT shooting
Only looking to sell as found myself with two scopes and one rifle! !
Ideally collect ...
This is a German world war two Police NCO's cap Eagle in good condition with both prongs intact.
Like many of this type of item, it has lost it's silver wash over the last eighty plus years but it ...
I bought this British made World War One American Infantry Officer's Cap Badge quite a few years ago, as I had never seen a World War One American Officer's cap badge in over fifty years of ...
CategoryAccessories
SubcategoryAntiques & Militaria
Condition -
MakeUnknown
ModelVery rare World War One American Infantry Officer\\\'s Bronze Cap Badge.
WW2 Luftwaffe Pilot's Arm Compass Model AK39 and Strap.
This is an original, WW2 Arm Compass issued to German Luftwaffe Pilots. The compass is the second pattern (Fl. 23235-1) with the white backed ...
Hikmicro Thunder TE19 2. 0 full set up.
This will allow you to use the Thunder as a thermal spotter, a front add on or a stand alone scope. It comes with everything needed plus I have recently ...
ADTAC RM-4 KRYPTEK Ruger 10/22 Rifle Stock.
Make your Ruger 10/22 stand out! The KRYPTEK stock is a perfect fit for your Ruger 10/22. With this stock you will never pick up the wrong Ruger 10/22 in ...
Custom made foregrip with underside picatinny rail (£22) and adjustable butt with rubber-like pad (£22) for your AEA Element PCP airgun, 3D printed plastic. Great looking, superlight and very er...
Custom made slip on threaded adapter with a front sight and glow in the dark dot allowing to attach a sound moderator to your Crosman pump airgun.
The body is plastic, but it has a metal thread, ...
This single shot loader is ideal for target competitions with a Weihrauch HW100. It automatically pops out at the last stage of cocking the air rifle after each shot. The swinging part securely ...
For sale is a front sight with fibre optic or glow in the dark dot and a standard 1/2" UNF thread allowing to attach a silencer to your Rohm Twinmaster airgun.
The body of the adapter is made of 3D ...
The LOBO Mustang PCP air rifle is a great fun, but is very noisy. So, this is a solution, which will not make your air gun looking awkward and will reduce the noise by about 50%. It slips on to both ...
Airsoft MK23 gas non-blowback pistol kit, 3D printed plastic, black.
Allows the original silencer/extension to be used.
Top, bottom and side picatinny rails.
With optional stock. ...
This is a 60mm (2. 5") long adapter (not a silencer) allowing to attach a moderator to your air rifle.
The adapter is a direct replacement of the original plastic front sight and will fit over a ...
A selection of superlight noise reducers for airguns, 3D printed with baffles.
Material is plastic reinforced with carbon fibre.
All have internal 1/2" UNF thread to attach to the gun.
Pic 1: ...
An ambidextrous grip (£19), made of strong 3d printed plastic, black for you CP1. Textured handle.
The skeleton stock is optional (£30 for both grip and stock).
Fixing bolts (M5x20 and M4x10) ar...
This is a replacement grip (£20) and optional stock (£25) with adjustable butt pad and cheek rest for the Reximex Mito PCP airgun.
The match grip has about 20mm vertical adjustment of the shelf fo...
Threaded Adapter (not moderator) for Webley Mastiff and Edgar Brothers Arms EV2.
Custom made screw on adapter with thread protector to attach a silencer/moderator to your Webley Mastiff and Edgar ...
I am selling off my surplus stock of brass cases. Some are rare and collectable.
8mm X 58R Danish Krag (50 of, Bertram) - £125 (once fired, u/s cleaned)
. 600 Nitro Express 3" (10 of) - £15 each (n...
I am selling off all of my surplus reloading die sets. Please see list below for details:
Trim pilot - LYMAN # 45, new - £5
Trim pilot - LYMAN # 26, new - £5
Case trimmer cutter - LEE - £5...