Bayonets for Sale

The ‘P1903’ design combined the ‘P1888’ blade and cross piece with a new pommel design. Many 1903 patter bayonets are actually P1888 bayonets that have been converted. This bayonet is a good example ...

Knife bayonet for use on the renowned 7. 5mm Sturmgewehr 57 (Assault Rifle 57) made by the firm ‘Schweizerische Industrie-Geellscaft’ (S. I. G). It was designated ’bajonett mod. 1957’ (Bayonet...

The Bayonet M1898/05 should succeed the M1898 long bayonet. It had a much stronger design but was still very long. In the beginning of the Great War it came with high ears and without flash guard. ...

An original Dutch M4 bayonet for the M1 Carbine, complete with scabbard and webbing frog. The bayonet has a black steel blade which measures 6 3/4" long. The blade has no markings. It is in perfect ...

British Sappers and Miners Units adopted an oval barrel rifle in 1855 and produced their own distinctive bayonet with a Falchion or pipe backed blade. The leather scabbard had brass fittings. After ...

This is a Lee Metford, 1888 mark II second pattern bayonet manufactured for the British. 303 calibre Enfield, Lee Metford Rifle. The bayonets 12 inch double edged blade is unfullered with a medial ...

This is a good condition M1917 bayonet made by Remington. It is nicely stamped on the ricasso with ‘1917 Remington’. The other side is stamped with the 'Flaming Grenade' over "US" and the eagles head...

This is an excellent condition WWII 1907 pattern bayonet for the Enfield rifle manufactured in ‘September 1943’. The ricasso is marked '1907, 'W. S. C (Wilkinson Sword Company) 9 '43 (Date). The reve...

This is a good condition M1917 bayonet made by Remington. It is nicely stamped on the ricasso with "Remington". The other side is stamped with the 'Flaming Grenade' over "US" and the eagles head ...

This is a very clean ‘1887’ patter ‘MKIII’ bayonet, and is the version with no fullers to the blade. The blade carries a crown over ‘V. R. /88’ (1888) it was probably made at ‘Enfield, Wilkinson’ and...

This is a great example of the ‘P13’ bayonet, which although designated ‘P13’, fit the ‘P14’ rifle and was not introduced until ‘1916’. It is marked to the blade with ‘1913’ over ‘5 17’ (May 1917) an...

This is a ‘G3’ bayonet to fit the German ‘G3’ rifle. Based on the Spanish ‘CETME’ rifle and introduced in ‘1959’. It has undamaged ribbed plastic grips and a blade similar to the American ‘M3’ kn...

This a lovely dated blade ‘M1’ bayonet that has been cut down from an ‘M1905’ long bayonet, denoted by the fact that the tip. The blade is marked with ‘S. A. ’ (Springfield Arsenal) over a flaming gr...

This is a nice ‘M1 Garand’ bayonet with a newly made blade and not a cut down ‘M1905’ or ‘M1942’. The fullers do not run through to the tip as with the cut down bayonets, but stop 2 ¾ “from the tip...

This is a nice ‘1907’ bayonet that has had its quillon removed on re-furbishment. The blade is stamped ‘Crown over G. R. 1907 10’11 (dating it October 1911) and ‘E. F. D. (Enfield). The production...

This is a scarce 1907 pattern bayonet manufactured by ‘Wilkinson Sword Company’ in WWII to fulfil a contract from the ‘Royal Navy’ for a bayonet to fit the ‘Lanchester’ sub machine gun which were m...

This is a rare M1 bayonet and not a cut M1905 or M1942 blade. The grips are plastic and are held to the bayonet by one screw bolt. The fullers on the blade do not go down to the tip, stopping 2 ¾ i...

Post 1858 British Army Sappers, Miners & Engineers 1855 Pattern Lancaster Rifle Pipeback Sword Bayonet By Reeves & Scabbard. Sn 18825 - 18825 British Sappers and Miners Units adopted an oval barrel ...

A WWI private purchase ‘Shikar’ hunting/fighting knife, the ricasso has the manufacturer’s stamp ‘W. L. & Co’. The handle is a polished black horn with steel rivets above a brass cross guard. The...

A very scarce American M1905 Bayonet made by ‘Springfield Arsenal’ in ‘1908’ and marked to the blade with ‘S. A. ’ over a flaming grenade and ‘1908’. The other side carries a ‘U. S. ’ over ‘324154’. T...